How to Flash Official TWRP Recovery 3.2.1-0 For Xiaomi Redmi Note 5A/Prime/Y1.

Flash TWRP Recovery Xiaomi Redmi Note 5A/Y1. The following guide will show you how to flash or install TWRP Recovery 3.2.1-0 For Xiaomi Redmi Note 5A/Prime/Y1.

Prerequiste.

1. You need to Download the TWRP recovery for Xiaomi Redmi Note 5A/Prime/Y1 from the following link. Here. Current and past version can be download from the following mirror
   • Primary (Americas) Here
   • Primary (Europes) Here
2. Download Android ADB and Fastboot Here
3. To flash TWRP into your Xiaomi device we need a computer or PC.

Instruction How to Install TWRP.

1. First, you need to install ADB Driver and ADB tool on your computer.
2. Then, extract the content of "platform-tools" folder in "C:/ADB"
3. Move or copy paste the TWRP recovery file to the ADB Folder. 
4. The TWRP file has the original name twrp-3.2.1-0-ugg.img, you need to rename it to recovery.img
5. Then, got you your phone and enable USB debugging. How to enable USB Debugging on Xiaomi Redmi Note 5A/Prime/Y1?
   • Go to settings
   • Tap About Phone
   • Now, tap MIUI Versions 7 times to unlock developer option.
   • Now, in developer options, you need to enable USB debugging.
6. Then, connect your Xiaomi Redmi Note 5A/Prime/Y1 to the computer via USB cable. The phone driver will automatically installed on your computer. Your Xiaomi Redmi Note 5A/Prime/Y1 need to be recognized by your PC, if not then install Xiaomi USB drivers.  Therefore you can install Mi PC Suite.
7. Now, you can safely remove the USB cable from the computer. Then power off the Xiaomi Redmi Note 5A/Prime/Y1
8. Then, enter fastboot mode. How to enter fastboot mode on Xiaomi Redmi Note 5A/Prime/Y1 device?
   • Make sure your Xiaomi Redmi Note 5A/Prime/Y1 is completely powered off.
   • Press and hold volume down button + Power button at the same time.
   • Release all button when your Xiaomi Redmi Note 5A/Prime/Y1 phone enters fastboot mode.
9. Once your Xiaomi Redmi Note 5A/Prime/Y1 enters fastboot mode, now re-connect to the computer via USB cable again.
10. Go to C:/ADB folder on the computer or PC.
11. From the ADB folder, right click + hold shift to open command windows here.
12. From the command prompt, now type the following command to check your Xiaomi connect to the computer or not.

    • fastboot device

13. The cmd should return to show your device ID. If not, then you need to reinstall ADB drivers.
14. Then, type the following command to flash twrp recovery into your Xiaomi Redmi Note 5A/Prime/Y1 device, following with press enter.

    • fastboot flash recovery recovery.img

15. Now, you will see the twrp installation, it will take a few seconds.
16. End

from Android Guide http://ift.tt/2B9o5ej

Tweet

Subscribe to receive free email updates: