[twrp MT6750] How to Root Lava A3 Install twrp Recovery

Root Recovery for Lava A3-

Install twrp Recovery and Root Lava a3, today we are going to Show you how to install twrp custom Recovery and Root Lava A3,

This is a Latest twrp Recovery and Root Guide for Lava A3 which is based on Mediatek MT6750, you can Install twrp Recovery Via Sp flash tools and Then Root Lava A3 by Flashing Latest SuperSu.zip via twrp Recovery,Lava A3 is a Latest android Smartphone by Lava come with android 6.0 OS and a 2.2 GHZ mediatek 6750 processor, the Lava A3 has a 3Gb of Ram and 32Gb of internal Storage expendable up to 64GB via SD card, it has a 13MP of primary camera and a 8MP of Secondary Camera which Record a full HD video, in connectivity the Lava A3 Support 4G and 3G Services with Bluetooth, wifi gps and Sensors{goryo, proximity etc,] Follow below Guide to Install twrp Recovery and Root Lava A3,

Note-

This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
This is the stable version of Rom/Recovery.
Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process,

Related to your Device-

Requirements-

Sp Flash tool latest Support MT67XX / or Use From Rom
pc and usb
vcom Driver must installed
twrp lava a3 [EGY and INT]

How to Install twrp Recovery on Lava A3-
Step 1.Download SP flash tools from above link and extract in a folder.{you can Extract on Desktop For Batter navigation,

Step 2.Install correct adb and Vcom Driver in your PC from above link[wrong Driver installation cause failure]

Step 3.Download[Tools, Rom, Recovery Etc} from above for your device and extract in a folder.

Step 4.Go to extracted SP tools folder and run sp flash tools exe file.{extracted In Above Steps]

Step 5.in SP tools go to Download tab and click on load scatter file and select scatter file from stock Rom folder.

Step 6.select what you want flash Select Whole Rom {in custom Recovery case Check Recovery Only}

Step 7.Remove battery of your phone and click on download button and immediately connect your smartphone into using usb.{if Not Detect then insert battery and connect}

Step 8.wait while flashing is complete it take a few minut to flash after success.insert battery and you are done switch on your smartphone.

How to Root Lava A3-

Download SuperSu.zip file From above and Save it to Device storage,
switch off phone and Long press power and volume up button,
your Device Booted into twrp, Go to backup tab and create a Nandroid backup
Go to format tab and do a factory reset,
Click Install zip from SD card, locate Downloaded Supersu.zip
swipe to Install, wait for success
Done,
Reboot System Now,

So this is a Complete guide to Install twrp Recovery and Root Lava A3, if you have any question let us know via Comment,
Search tag-

root Lava A3, twrp for Lava A3, root guide for Lava A3,rooten Lava A3, root steps for Lava A3, root instructions for Lava A3, step by step to Root Lava A3, rooLava A3 without pc, root instructions for Lava A3, root Lava A3 without unlockLava A3, twrp MT6750, recovery cwm philz rom custom For Lava A3,

[twrp MT6750] How to Root Lava A3 Install twrp Recovery

0 Response to "[twrp MT6750] How to Root Lava A3 Install twrp Recovery"

Post a Comment