How to Install twrp Recovery and Root Telcast X80 Plus

Root twrp for Telcast X80 Plus-

Root guide and twrp Recovery now available for Telcast X80 Plus, you can install twrp recovery on Telcast X80 Plus  by following below Guide,

 

Install twrp recovery and Root Telcast X80 Plus, in this article we are going to show you how to install twrp Recovery and Root Telcast X80 Plus, Telcast X80 Plus is a 8 inch metro pc or tablet come with window 10 and android 5.1 Dual OS, the Telcast X80 Plus has a 2GB of RAM and 32GB of ROM expandable up to 64GB via SD card,this is 64bit Device that accept 4G connectivity,

after twrp Installation you can Root Telcast X80 Plus by flashing latest supersu.zip, Rooting may void your Device warranty so be careful before doing anything, take a backup of your personal data if before Rooting, after rooting you can install custom Rom and ZIp file on it, follow below Guide to Install twrp Recovery and Root Telcast X80 Plus,

Downloads-

• official Rom H6C3
• official Rom H5C5
• Root File H5C5
• Root file H6C3

How top Root Telcast X80 Plus-
First, download the root files (at the bottom of this post) accroding to your tablet model (at the back of your tablet) and install the driver in the computer.
Please install in the following order:
1) iSocUSB-Driver-Setup-1.2.0.exe
2) IntelAndroidDrvSetup1.5.0.exe
3) PhoneFlashTool_5.3.4.0_win32.exe

Pay attention to the following points
a) �you must install those driver in the above order
b) �Don't change the install location of those driver
c) �Close your antivirus software to avoid unknow problem

Then, go to Settings>Developer Options>USB Debugging. Enable OEM Unlock and enable USB Debugging Mode

Now, connect your X80 Plus to the computer,
Open a Command Prompt window in "Root X80 Plus H6C3" folder (To open a Command Prompt window in any folder, hold down the shift key and right-click on the folder) and enter the following command

Code:

adb reboot bootloader

Press Enter

Wait for the device to enter fastboot mode

Code:

fastboot oem unlock

Press Enter to unlock the oem and enter the following command

Code:

fastboot flash boot boot.img

Press enter to flash the kernal, then enter the following command

Code:

fastboot reboot

This command will restart your tablet.
It is normal that tablet reboot 3 to 4 times automatically, just wait for it. (turn on the tablet yourself if the tablet do not reboot automatically)
After your device is on, check that Wifi and bluetooth works or not. (Wifi and Bluetooth may not works with the replaced kernal, just perform a factory reset)
If everything is ok, enter the following command

Code:

root.bat

Wait for the Command Prompt until it stuck at this command, "adb shell su --daemon"
Now, disconnect the tablet and reboot it manuly
After the device was booted up, Supersu already become a part of system app.
Open Supersu now, it will notify that the SU binary needs to be updated. You must need to install the binary once, but you will fail at 100%(unless there is a miracle, and your tablet is root successfully, congratulations)
Close Supersu and reconnect the tablet, enter the following command again.

Code:

root.bat

Now the command prompt should run all of the command smoothly and Supersu should have no message about the SU binary update !!
Therefore, if your Supersu shows nothing (works properly), your tablet is rooted, thats amazing.
If yes, please enter the following command again and wait for it to boot up automatically until Supersu have no message about the binary update.

Code:

root.bat

Note that this root method are not stable yet
Known issues:
1) Old version of Titanium Backup was unable to execute the SU command
2) LBE are not 100% compatible with this root
Source- xda
So this is a Complete Guide to install twrp Recovery and Root Telcast X80 Plus, if you have any question let us know via Comment,
Search tag-

root Telcast X80 Plus, twrp Telcast X80 Plus, root guide for Telcast X80 Plus cara root Telcast X80 Plus, rooten Telcast X80 Plus, para root Telcast X80 Plus root instructuons for Telcast X80 Plus, custom Rom for Telcast X80 Plus, cyyanogenmod for Telcast X80 Plus, cm14. lineage os for Telcast X80 Plus,

Tweet

Subscribe to receive free email updates: