How to Install Lineage os 14.1 on Huawei P9 Lite
Lineage os for Huawei P9 Lite-
Camera
Step: 1) First, Download and install a custom recovery. If you already had a custom recovery installed on your device then skip this step.
Step: 2) Download the Rom File for your Device and Gapps from above and save it on your device[external Storage].
Step: 3) Now Boot your device into Recovery mode by press and hold “Volume Down+Power Button”
Step: 4) Now you will enter into recovery mode. Now in TWRP, create a Nandroid backup (Recommended) of your device for safer side, if anything goes wrong.
Step: 5) Now do a Factory Reset by Goto Wipe>Advanced Wipe>Select Wipe cache, Dalvik cache, System, and data and swipe to confirm it.
Step: 6) Now, Go to Install and locate the ROM zip file & swipe to Install the ROM file. After the process completes, Flash the G-Apps zip file.and fix file{if present}
Step: 7) Now wipe cache & Dalvik cache again and Reboot your device.
Step: 8) Done! [flash patch/fix if available]
So This is the complete guide to To install Lineage OS 14.1 android 7.0 Nougat unofficial Rom On Huawei P9 Lite if you have any question Let us Know via Comment,
Search tag-
Lineage os 14.1 now available for Huawei P9 Lite, you can Download and install this Rom on Huawei P9 Lite by following below Guide,
Download and install Lineage os 14.1 on Huawei P9 Lite, Here is a Step by Step Guide to Install Lineage os 14.1 Custom Rom on Huawei P9 Lite, xda recognized member meticulus Prepare a intial build of Lineage os 14.1 for Huawei P9 Lite and available for Huawei P9 Lite, this is a initial build of Rom which have some bug, but Meticulus work on it and fix them as soon as possible, to install the Lineage os on Huawei P9 Lite you must have a Rooted Device with a Custom Recovery Installed, Follow below Guide to Install Lineage os 14.1 Rom on Huawei P9 Lite,
Lineage OS 14.1 [for huawei p9 lite] is one of the best featured Android Custom Rom Available for most of the Android Smartphone. Lineage os 14.1 is built by the community of developer. it is a free and open source software based on the official releases of Android by Google, with added original and third-party code. It is based on a rolling-release development model. lineage OS 14.1 has a lot of features such as Cyanogenmod Launcher, Themes, Notifications, Lock screen, Buttons, System Profiles, Status Bar, Privacy, etc.
Note- - This ROM/Recovery is work on Listed Device only. Don’t try this on any other device.otherwise it cause bootloop,
- Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage to your phone.
- It will erase all your data, so we advise you first to take a complete backup of your phone and then proceed.
- Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
- How to Install htc Gallery on any Android Device
- How to Install Dolby Atoms on Any android Device
- How to install Xposed Framework on Any android Device
- How to Install Xtram Music pure audio on any Android Device
- From Developer Blog
- thread Link
- gapps for Lineage os
- VNS-L21
- VNS-L22
- VNS-L23
- VNS-L31
- NEM-L21
- NEM-L22
- NEM-L51
- NMO-L21
- NMO-L23
- NMO-L31
- NEM-UL10
- Should Work but not yet confirmed.
- NMO-L22
- Not Working
- NEM-AL60 ( not supported.)
- NEM-AL10 ( not supported.
Camera
- Fix media server crashing... ( I think I got it this time. )
- Wifi hotspot does not work on first attempt but does work on all subseqent attempts.
- Wifi hotspot: 5ghz does not work ( and is probably not supposted to ).
- Try again to apply the NEMO mixer fix by przemas2468 @ xda-developers.com . I didn't have it correct the first time.
- Try again to fix 2 pin headphone plug detect... ( Needs testing )
- Put vsync thread to sleep when not inuse and exit on vblank. Should save power and decrease processor usage.
- remove POWER_HINT_AUDIO
- add POWER_HINT_SUSTAINED_PERFORMANCE
- LineageOS Updater removed
- config_wifi_dual_band_support=true
- config_bluetooth_le_peripheral_mode_supported=true
- config_enableWifiDisplay=true
- config_useDevInputEventForAudioJack=true
- config_dontPreferApn=true
- config_showOperatorNameInStatusBar=true
- Massive clean up.
- Language Translations
- Fix "Use Google H264" switch. (Still Laggin)
- NEW Experimental Gyroscope sensor.
- Be Kind --- No idea what I'm doing here...
- LineageOS Source Code Update 02/21/2017
- Working
- RIL (dual sim not tested)
- LCD Display
- Touch Screen
- Audio
- Bluetooth
- Deep Sleep
- External SD Card: "Portable Storage" use
- External SD Card: "Internal Storage" use
- GPS
- Battery Usage Stats
- Accelerometer Sensor
- Proximity Sensor
- Magnetic Sensor
- Luminosity Sensor
- Fingerprint
- Battery Stats
- WIFI
- USB Tethering
- Bluetooth Tethering
- Camera Front: Photo Snap
- Camera Rear: Photo Snap
- Camera Front: Video Recording
- Camera Rear: Video Recording
- NFC
- Partially Working
- WIFI Hotspot (works on 2nd attempt)
- External SD Card: "Internal Storage" use
- There is an issue where the sdcard becomes randomly unmounted and remounted. This may cause Apps to freeze, therefore using the external sdcard as internal storage is not recommended at this time.
- Not Working
- Camera: geotagging
- Must be disabled in all camera apps in order for the camera to function properly
- SELinux
- "Encrypt Phone" in Settings -> Security causes a boot loop ( DO NOT USE! )
- Minor issues
- Some users say that Cellular signal strength is lower than they expect.
- This is most likely just a problem with how the signal strength is reported and not the actual signal strength.
- Screenmirroring on Chromecast
- I can not test this and therefore can not fix it.
- Some users say that the "Text To Speech" voice is abnormal.
- Contacts on the SIM card can not be imported.
- Still ocassional crash of "media server" while using camera.
- Thought I had this fixed... nobody's perfect...
- NEM-XXX Minor Issues.
- Audio records in reverse stereo
- Stereo headphones are not detected. Stereo + Mic works.
- Will Not Be Worked On
- FM Radio
- Emulated Gyroscope
Step: 1) First, Download and install a custom recovery. If you already had a custom recovery installed on your device then skip this step.
Step: 2) Download the Rom File for your Device and Gapps from above and save it on your device[external Storage].
Step: 3) Now Boot your device into Recovery mode by press and hold “Volume Down+Power Button”
Step: 4) Now you will enter into recovery mode. Now in TWRP, create a Nandroid backup (Recommended) of your device for safer side, if anything goes wrong.
Step: 5) Now do a Factory Reset by Goto Wipe>Advanced Wipe>Select Wipe cache, Dalvik cache, System, and data and swipe to confirm it.
Step: 6) Now, Go to Install and locate the ROM zip file & swipe to Install the ROM file. After the process completes, Flash the G-Apps zip file.and fix file{if present}
Step: 7) Now wipe cache & Dalvik cache again and Reboot your device.
Step: 8) Done! [flash patch/fix if available]
So This is the complete guide to To install Lineage OS 14.1 android 7.0 Nougat unofficial Rom On Huawei P9 Lite if you have any question Let us Know via Comment,
Search tag-
lineage os 14.1 for Huawei P9 Lite, cara flash lineage os on Huawei P9 Lite, download lineage os 14.1 for Huawei P9 Lite, flash lineage os 14.1 rom on Huawei P9 Lite, como installer lineage os 14.1 on Huawei P9 Lite, Download and install lineage 14.1 custom Rom on Huawei P9 Lite, para install lineage os 14.1 Huawei P9 Lite, custom ROm for Huawei P9 Lite, best rom for Huawei P9 Lite, cm14 for Huawei P9 Lite, miui 8 nougat rom for Huawei P9 Lite,
0 Response to "How to Install Lineage os 14.1 on Huawei P9 Lite"
Post a Comment