» » » How to Flashing Samsung Galaxy J3 via Odin

How to Flashing Samsung Galaxy J3 via Odin

, Edit
How to easily Flashing Samsung Galaxy J3 - Tutorial on how to flash Samsung Galaxy J3 via Odin v3.10.7 this you can use to overcome various problems or damage software Samsung Galaxy J3, software problems so often we encounter and can be addressed by means of flashing like Samsung Galaxy J3 bootloop, problematic application in Samsung Galaxy J3, overcoming Application has stopped in Samsung Galaxy J3, Overcoming Application does not responding on your Samsung Galaxy J3, to upgrade the latest firmware in Samsung Galaxy J3, etc.

For those of you users Samsung Galaxy J3 who experience problems like the above and other software problems, Please refer to and follow the tutorial on how to flash Samsung Galaxy J3 below.

To be able to do flashing Samsung Galaxy J3, previously you must have downloaded some materials needed such as firmware Samsung Galaxy J3, Driver Samsung Galaxy J3 and Odin.

Materials needed root Samsung Galaxy J3:

Step-by-step tutorial on how to flash Samsung Galaxy J3

  1. Extract all the materials that you have downloaded on your computer.
  2. Install Samsung USB Driver on your computer (Drivers handy so that Samsung Galaxy J3 can be detected in the computer Odin)
  3. Turn Off Samsung Galaxy J3
  4. Go into Download mode Samsung Galaxy J3 by way of press and hold Volume Down + Home + Power simultaneously until appears Warning!!, Next press the Volume button Up one time to continue getting into Download mode Samsung Galaxy J3. 
  5. Next connect Samsung Galaxy J3 to the computer using the USB cable.
  6. Open Odin3 v3.10.7
  7. Make sure the Samsung Galaxy J3 already detected Odin3 v 3.10.7, to know Samsung Galaxy J3 already detected Odin, please look at the port ID:COM in the picture below. 
  8. Enter firmware Samsung Galaxy J3 to Odin by means of click on the tab in the AP Odin3 v 3.10.7 and load firmware Samsung Galaxy J3 extract on your computer. 
  9. Next click on START to begin the process of flash Samsung Galaxy J3 via Odin3 v 3.10.7
  10. Wait for the flashing Samsung Galaxy J3 via odin to complete.
  11. If the process flash Samsung Galaxy J3 via Odin3 v 3.10.7 is finished you will see writing PASS like the picture below. 
  12. Samsung Galaxy J3 flash process has been successfully
  13. Off the USB cable and turn on the Samsung Galaxy J3
Quite the easy way flashing Samsung Galaxy J3 via Odin v 3.10.7 we can share for you users Samsung Galaxy J3. Good luck and hopefully how to flash Samsung Galaxy J3 of this can be useful for you in need.

Subscribe to receive free email updates:

0 Response to "How to Flashing Samsung Galaxy J3 via Odin"

Post a Comment

Subscribe to: Post Comments (Atom)