Guide | How to Flash Firmware on Motorola XOOM 2 Media Edition 3G MZ608.

Flash Motorola XOOM 2 MZ608. Flashing process also known as installing a new firmware into device. Firmware is a software used to monitoring, controlling and manipulating a device to run well. So, if your device have any error or slow response, you can try to flash with the latest firmware for your device. And now on this guide we will show you how to flash Firmware on Motorola XOOM 2 Media Edition 3G MZ608. It's a simple guide you can follow with a small risk. But, you must always be careful to do it on your Motorola XOOM 2  MZ608 device to avoid damage or totally dead.

Here is your Motorola XOOM 2 Media Edition 3G MZ608 specifications. This device released on 2011, December. With 8,2 inches TFT capacitive touchscreen, 16M colors, powered by Dual-core 1.2 GHz Cortex-A9 CPU, TI OMAP 4430 Chipset, and PowerVR SGX540 GPU. Supported by 1 GB internal memory, 5 MP primary camera, 1,3 MP secondary camera. And run on Android OS, v3.2 (Honeycomb), planned upgrade to v4.0.4 (Ice Cream Sandwich).

Flashing Motorola XOOM 2 Media Edition 3G MZ608 start here.

#1 Step.

1. All data and file stored on Motorola XOOM 2 Media Edition 3G MZ608 must be moved to the save storage.
2. Make sure battery isn't empty or minimum has 75% of battery capacity.
3. Don't use unoriginal USB cable to connect between your Motorola XOOM 2 Media Edition 3G MZ608 to the PC or laptop.
4. Motorola XOOM 2 Media Edition 3G MZ608 driver should installed correctly on your computer or laptop. You can download this driver via this link below.

https://androidmtk.com/download-motorola-usb-drivers

5. Now you must download and install RSD lite Multi Flash tool from here.

http://rsdlite.com/rsd-lite-download/

6. Now, download Motorola XOOM 2 MZ615 firmware file.
• 1.6.0M-272.10_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip

https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/1.6.0M-272.10_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip

• 1.6.0M-272.12_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip

https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/1.6.0M-272.12_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip

• 1.6.0M-272.18_MZ608_p2HW_BlurRegion01_CFC1FF_fastboot_signed_latam.xml.zip

https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/1.6.0M-272.18_MZ608_p2HW_BlurRegion01_CFC1FF_fastboot_signed_latam.xml.zip

• 1.6.0M-272.18_MZ608_p2HW_BlurRegion03_CFC1FF_fastboot_signed_latam.xml.zip

https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/1.6.0M-272.18_MZ608_p2HW_BlurRegion03_CFC1FF_fastboot_signed_latam.xml.zip

• 1.6.0M-272.19_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip

https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/1.6.0M-272.19_MZ608_p2HW_BlurRegion02_CFC1FF_fastboot_signed_latam.xml.zip

• 1.6.0M-272.20_MZ608_p2HW_BlurRegion04_CFC1FF_fastboot_signed_latam.xml.zip

https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/1.6.0M-272.20_MZ608_p2HW_BlurRegion04_CFC1FF_fastboot_signed_latam.xml.zip

• 7.7.1-141-7-FLEM-UMTS-LA_MZ608_p2HW_BlurRegion06_CFC1FF_fastboot_signed_latam.xml.zip

https://firmware.center/firmware/Motorola/Xyboard%20%28Xoom%202%2C%20Droid%20Xyboard%29/Stock/7.7.1-141-7-FLEM-UMTS-LA_MZ608_p2HW_BlurRegion06_CFC1FF_fastboot_signed_latam.xml.zip

#2 Step. Flashing Motorola XOOM 2 Media Edition 3G MZ608.

1. Now, boot Motorola XOOM 2 Media Edition 3G MZ608 device to bootloader mode. How to do it ?
• Power off the Motorola XOOM 2 MZ615, by press and hold power button for a seconds, it will completely turn off the device.
• Now, press and hold both volume down + volume up button.
2. Now, connect your Motorola XOOM 2 Media Edition 3G MZ608 to the computer via USB cable.
3. Make sure your Motorola XOOM 2 Media Edition 3G MZ608 successfully detected on your computer via bootloader mode.
4. If failed, try to use original USB cable or change your computer port.
5. Then, Open RSD Lite from start menu.

   

   rsd lite flash tool

6. Click the button assigned with red circle show at picture above to load Motorola XOOM 2 Media Edition 3G MZ608 firmware.
7. Firmware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
8. Once your firmware successfully load, RSD lite should look like picture shown below.

   

   rsd lite

9. Now click start button.
10. Flashing process will start automatically without your interference.
11. Wait a while until flashing your Motorola XOOM 2 Media Edition 3G MZ608 finish.

Tweet

Subscribe to receive free email updates: