Guide | How to Flash Firmware Motorola Droid Turbo 2 (XT1585) With RSD Lite.

Flash Motorola Droid Turbo 2 (XT1585). If your Motorola Droid Turbo 2 (XT1585) device runs very slow to open an App or not responsive. This mean, your firmware have a system problem. You can fix it by perform hard reset or factory reset to this device. But if this doesn't work you can try to upgrade the Motorola Droid Turbo 2 (XT1585) device firmware. For the latest products, usually it will supported by manufacturer to get OTA (Over The Air) firmware update.But if your Motorola Droid Turbo 2 (XT1585) device no longer get OTA update from your manufacturer, you can try manually update this device. To start manually update simply download firmware and flash tool called RSD lite to your computer.

Before we start our guide, this is a specifications for Motorola Droid Turbo 2 (XT1585) device. This device run on Android OS, v5.1.1 (Lollipop), v6.0, planned upgrade to v7.0 (Nougat), Powered by, Octa-core (4x1.5 GHz Cortex-A53 & 4x2.0 GHz Cortex-A57) CPU, Qualcomm MSM8994 Snapdragon 810 chipset, Adreno 430 GPU. 3 GB of RAM. And supported by 21 MP of primary camera, 5 MP of secondary camera. Motorola Droid Turbo 2 released on 2015, October.

Let's we start our guide how to flash Motorola Droid Turbo 2 (XT1585).

#1 Step- Preparations.

1. To avoid your file, data, installed App and account stored in internal phone memory lose during flashing process. you must backup it and save at the other storage.
2. Battery must fully charged to perform flash Motorola Droid Turbo 2 (XT1585).
3. Always use an original USB cable to keep a good connections between your Motorola Droid Turbo 2 (XT1585) device and the computer.
4. In order to make your Motorola Droid Turbo 2 (XT1585) device detected on your computer or laptop, driver should installed correctly, you can download Motorola Droid Turbo 2 (XT1585) driver via this link below.

https://androidmtk.com/download-motorola-usb-drivers

5. In order to help you flash a firmware into Motorola Droid Turbo 2 (XT1585), you need to Download and install RSD Lite Multi flash to the computer or laptop.

http://rsdlite.com/rsd-lite-download/ 

6. Try this firmware below to flash your Motorola Droid Turbo 2 (XT1585) device.
• Motorola Droid Turbo 2 (XT1585)

https://firmware.center/firmware/Motorola/Droid%20Turbo%202%20%28XT1585%29/

#2 Step - Flashing Motorola Droid Turbo 2 (XT1585).

1. Boot your Motorola Droid Turbo 2 (XT1585) device to Fastboot mode. How to do it ?
• Power off the Motorola Droid Turbo 2 (XT1585), by press and hold power button for a seconds, it will completely turn off the device.
• Now, press and hold both volume down + volume up button.
2. Now, connect your Motorola Droid Turbo 2 (XT1585) to the computer via USB cable.
3. Make sure your Motorola Droid Turbo 2 (XT1585) successfully detected on your computer via Fastboot mode.
4. If there is something wrong, you can try to change USB cable or computer port.
5. Now, Open your RSD Lite software on your computer from start menu.



rsd lite flash tool

6. Now click the button marked with the arrow and red circle shown at picture above to load Motorola Droid Turbo 2 (XT1585)  firmware.
7. Firmware file should have this extensions (*.hs, *.xml, *.shx, *.sbf, etc)
8. Once your Motorola Droid Turbo 2 (XT1585) firmware successfully loaded, RSD lite flash tool should look like picture shown below.



rsd lite - flash Motorola Droid Turbo 2 (XT1585)

9. Now click start button at RSD lite window to begin the flashing process.
10. Flashing your Motorola Droid Turbo 2 (XT1585) will start automatically without your interference.
11. Just wait a while until flashing your Motorola Droid Turbo 2 (XT1585) done.

Tweet

Subscribe to receive free email updates: